MMOMinion

Here you can ask for help when setting up a profile :)


FAQ:

OK trying to setup my sub 350 CP 100% HQ Culinary profile running into a few small problems here.

1. TOTT - Priority 0 Condition = Good OR Good
2. IQ - Priority 1, Buff not 251, Step <=1 -- After manually popping Masters Mend II Bot is recasting IQ and killing the stack
4. Steady Hand II - Priority 3, Buff not 262
5. Masters Mend II - Priority 4 Dur <= 20 -- Bot is sticking here
6. Hasty Touch - Priority 5 Dur >= 20
7. Rumination - priority 6 Progress <= 100 -- This needs to pop once hasty Touch stack gets to 100 percent progress
8. Masters Mend - Priority 7 <= Progress 100
8. Basic Synth - Priority 8 Progress <= 100

Any ideas?

For some reason my profile is having problems too:

1. IQ - Priority 1, Step <=1
2. TOTT - Priority 2, Condition = Good OR Good, CP <= 216
3. Master's Mend - Priority 3, CP >= 92, Dur <= 40
5. Steady Hand - Priority 4, CP >= 22, Buff not 253
6. Basic Synth - Priority 5, CP <= 91, Dur <= 30, Buff 253
7. Careful Synth - Priority 6, CP <= 91, Dur <= 30,
8. Standard Touch - Priority 7, CP >= 32, Quality <= 99, Dur >= 20, Condition=Excellent or Excellent
9. Hasty Touch - Priority 8, Quality <= 99, Dur >= 20

After the first Steady Hand the console says D= "Can't cast anything please check that your profile is set up correctly"

Suggestions?

R3P0: It might be sticking because you're treating progress as a percentile rather than a literal number. Unless you happen to be making something with a 100 difficulty?

(11-08-2013, 01:41 PM)R3P0 Wrote: [ -> ]OK trying to setup my sub 350 CP 100% HQ Culinary profile running into a few small problems here.

1. TOTT - Priority 0 Condition = Good OR Good
2. IQ - Priority 1, Buff not 251, Step <=1 -- After manually popping Masters Mend II Bot is recasting IQ and killing the stack
4. Steady Hand II - Priority 3, Buff not 262
5. Masters Mend II - Priority 4 Dur <= 20 -- Bot is sticking here
6. Hasty Touch - Priority 5 Dur >= 20
7. Rumination - priority 6 Progress <= 100 -- This needs to pop once hasty Touch stack gets to 100 percent progress
8. Masters Mend - Priority 7 <= Progress 100
8. Basic Synth - Priority 8 Progress <= 100

Any ideas?

Here's my Culinary profile. I'm only 40 with 270 CPs, but it's running in the 90+ percentile in on-level LQs to HQs (70/80s...40s are meh). I tend to stack and buff Control to take advantage of IQ, but I think I need to look at more balance. Obviously the numbers need to be adjusted for your character and job.

1. TOTT, CP <= 256, Good OR Good --Why waste the good touch chance if I already have a full bar of CPs?
2. IQ, Step <= 1, Buff NOT 251
3. Steady Hand II, CP >= 25, Buff NOT 262
-- This one changes, I keep each synth type here that I click on or off based on the difficulty vs level/craftsmanship/etc --
4. Standard Synthesis, CP >= 15, Progress <= 60, Buff 262
5. Master's Mend II, CP >= 160, Durability <= 10 --On a 70: on an 80 make this 20
-- I keep Manipulation here and use it in place of MMII on 40s. Trigger Manip on Dur <= 20 or your synth will fail! --
6. Master's Mend, CP >= 92, Durability <= 10 --Normally eeks out 3 more touches after a Rumination
7. Hasty Touch, Quality <= 1756, Durability >= 11 -- Quality <= Max Quality - 1
8. Rumination, CP <= 95, Quality <= 1756, Durability <= 10, Buff 251
-- I also keep each synth type here and click it on or off based on the recipe --
9. Careful Synthesis -- Catch-All so no conditions

We're pretty similar, but I use a few more conditions and layer another skill in there. I'm also operating at a lower level than you are so this might not work for you at all, but I hope it helps anyhow.

Quality and Progress are not %'s at the moment.

They will be next update. That is your problem for now.

Only thing that does not seem to be working is

8. Rumination, CP <= 95, Quality <= 1756, Durability <= 10, Buff 251
-- I also keep each synth type here and click it on or off based on the recipe --

I have Rumination set at
Priority 6, CP <= 91, Quality <=2370, Durability <=10, Buff=251

Any ideas?

(11-08-2013, 04:46 PM)R3P0 Wrote: [ -> ]Only thing that does not seem to be working is

8. Rumination, CP <= 95, Quality <= 1756, Durability <= 10, Buff 251
-- I also keep each synth type here and click it on or off based on the recipe --

I have Rumination set at
Priority 6, CP <= 91, Quality <=2370, Durability <=10, Buff=251

Any ideas?

Quality depends on the item, i should have really though about making it a % thing... But uhm, does it not work or something?

(11-08-2013, 07:12 PM)ymko Wrote: [ -> ]

(11-08-2013, 04:46 PM)R3P0 Wrote: [ -> ]Only thing that does not seem to be working is

8. Rumination, CP <= 95, Quality <= 1756, Durability <= 10, Buff 251
-- I also keep each synth type here and click it on or off based on the recipe --

I have Rumination set at
Priority 6, CP <= 91, Quality <=2370, Durability <=10, Buff=251

Any ideas?

Quality depends on the item, i should have really though about making it a % thing... But uhm, does it not work or something?

Yeah Rumination is not working at all with my setup

Anyone have a working BSM setup for crafting 40 dura at lvl 30+

(11-08-2013, 07:24 PM)R3P0 Wrote: [ -> ]

(11-08-2013, 07:12 PM)ymko Wrote: [ -> ]

(11-08-2013, 04:46 PM)R3P0 Wrote: [ -> ]Only thing that does not seem to be working is

8. Rumination, CP <= 95, Quality <= 1756, Durability <= 10, Buff 251
-- I also keep each synth type here and click it on or off based on the recipe --

I have Rumination set at
Priority 6, CP <= 91, Quality <=2370, Durability <=10, Buff=251

Any ideas?

Quality depends on the item, i should have really though about making it a % thing... But uhm, does it not work or something?

Yeah Rumination is not working at all with my setup

I'll have a look in the morning tomorrow, as well as release autorepair, autofeed version and fix some bugs that were foudn so far :)