+- MMOMinion (https://www.mmominion.com)
+-- Forum: FFXIVMinion (https://www.mmominion.com/forumdisplay.php?fid=87)
+--- Forum: [DOWNLOADS] Addons, Lua Modules, Navigation Meshes.. (https://www.mmominion.com/forumdisplay.php?fid=90)
+---- Forum: Outdated (https://www.mmominion.com/forumdisplay.php?fid=110)
+---- Thread: Help with setting up profiles (/showthread.php?tid=4787)
RE: Help with setting up profiles - R3P0 - 12-13-2013
Ymko Not sure what is going on but all the profiles are sticking on Steady hand II is the new version ready for testing this is kinda driving me nuts here
RE: Help with setting up profiles - darkboz - 12-13-2013
Can u link to me your profiles R3P0 ? i could take a look, i'am pretty experienced now :)
RE: Help with setting up profiles - R3P0 - 12-13-2013
(12-13-2013, 04:24 PM)darkboz Wrote: Can u link to me your profiles R3P0 ? i could take a look, i'am pretty experienced now :)
Theoretically Rumination and Steady Hand II should work but they are not
Quote:CT_Prof=Alchemist
CT_ID=100098
CT_NAME=Tricks Of The Trade
CT_ON=1
CT_PRIO=1
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=0
CT_CPMAX=246
CT_STEPMIN=0
CT_STEPMAX=0
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=0
CT_DURABILITYMIN=0
CT_DURABILITYMAX=0
CT_CONDONE=Good
CT_CONDTWO=Good
CT_BUFF=0
CT_NOTBUFF=0
CT_END=0
CT_ID=258
CT_NAME=Inner Quiet
CT_ON=1
CT_PRIO=2
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=0
CT_CPMAX=0
CT_STEPMIN=0
CT_STEPMAX=1
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=0
CT_DURABILITYMIN=0
CT_DURABILITYMAX=0
CT_CONDONE=
CT_CONDTWO=
CT_BUFF=0
CT_NOTBUFF=251
CT_END=0
CT_ID=281
CT_NAME=Steady Hand II
CT_ON=1
CT_PRIO=3
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=25
CT_CPMAX=0
CT_STEPMIN=0
CT_STEPMAX=0
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=0
CT_DURABILITYMIN=0
CT_DURABILITYMAX=0
CT_CONDONE=
CT_CONDTWO=
CT_BUFF=0
CT_NOTBUFF=262
CT_END=0
CT_ID=100108
CT_NAME=Hasty Touch
CT_ON=1
CT_PRIO=4
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=0
CT_CPMAX=0
CT_STEPMIN=0
CT_STEPMAX=0
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=0
CT_DURABILITYMIN=15
CT_DURABILITYMAX=0
CT_CONDONE=
CT_CONDTWO=
CT_BUFF=0
CT_NOTBUFF=0
CT_END=0
CT_ID=100092
CT_NAME=Master's Mend
CT_ON=1
CT_PRIO=5
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=92
CT_CPMAX=0
CT_STEPMIN=0
CT_STEPMAX=0
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=0
CT_DURABILITYMIN=0
CT_DURABILITYMAX=11
CT_CONDONE=
CT_CONDTWO=
CT_BUFF=0
CT_NOTBUFF=0
CT_END=0
CT_ID=276
CT_NAME=Rumination
CT_ON=1
CT_PRIO=6
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=0
CT_CPMAX=92
CT_STEPMIN=0
CT_STEPMAX=0
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=0
CT_DURABILITYMIN=0
CT_DURABILITYMAX=0
CT_CONDONE=
CT_CONDTWO=
CT_BUFF=0
CT_NOTBUFF=276
CT_END=0
CT_ID=100090
CT_NAME=Basic Synthesis
CT_ON=1
CT_PRIO=7
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=0
CT_CPMAX=0
CT_STEPMIN=0
CT_STEPMAX=0
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=0
CT_DURABILITYMIN=0
CT_DURABILITYMAX=0
CT_CONDONE=
CT_CONDTWO=
CT_BUFF=0
CT_NOTBUFF=0
CT_END=0
RE: Help with setting up profiles - darkboz - 12-13-2013
(12-13-2013, 04:37 PM)R3P0 Wrote:(12-13-2013, 04:24 PM)darkboz Wrote: Can u link to me your profiles R3P0 ? i could take a look, i'am pretty experienced now :)
Theoretically Rumination and Steady Hand II should work but they are not
Quote:removed to be shorter :)
Ok i got your profile here is the issues with it i noticed, IQ & SHII are casted properly but rumination is getting stuck because you cast it one time, then it try to recast it in loop, that's because u made a mistake in the buff/debuff here is how to setup rumination properly
CT_ID=276
CT_NAME=Rumination
CT_ON=1
CT_PRIO=9
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=0
CT_CPMAX=91
CT_STEPMIN=0
CT_STEPMAX=0
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=99
CT_DURABILITYMIN=0
CT_DURABILITYMAX=10
CT_CONDONE=
CT_CONDTWO=
CT_BUFF=251
CT_NOTBUFF=0
CT_END=0
Rumination isn't a buff so you can't check it with CT_NOTBUFF=276 you need however to check if you have the IQ buff on you hence the CT_BUFF=251 (because it will try to loop cast rumination otherwise), also u need to set CT_CPMAX=91 to be sure it doesn't cast rumination when u have enough CP to MM (Master's Mend), i've also setted up CT_QUALITYMAX=99 for my one-step synth 40/40 craft so that it doesn't cast rumination if quality is already 100% (no need and save time), i also put CT_DURABILITYMAX=10, so that when rumination is activated, it will either finish the craft because i didn't got enough CP from it to repair, or it will repair, it allow maximum of IQ stacks.
Nowadays i use the combo Great Strides / Byregot's Blessing instead of rumination (much more badass imho)
But i dunno how far you've got with your levelling :)
For IQ & SHII your profile look fine, and it did well with my tests, here is mine for comparison
CT_ID=258
CT_NAME=Inner Quiet
CT_ON=1
CT_PRIO=3
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=0
CT_CPMAX=0
CT_STEPMIN=0
CT_STEPMAX=3
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=99
CT_DURABILITYMIN=0
CT_DURABILITYMAX=0
CT_CONDONE=None
CT_CONDTWO=None
CT_BUFF=0
CT_NOTBUFF=251
CT_END=0
CT_ID=281
CT_NAME=Steady Hand II
CT_ON=1
CT_PRIO=4
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=25
CT_CPMAX=0
CT_STEPMIN=0
CT_STEPMAX=0
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=99
CT_DURABILITYMIN=0
CT_DURABILITYMAX=0
CT_CONDONE=
CT_CONDTWO=
CT_BUFF=0
CT_NOTBUFF=262
CT_END=0
Hope it helps you resolve your issues, but aside from rumination loop, your profile looked fine.
Cya :)
RE: Help with setting up profiles - R3P0 - 12-28-2013
(12-13-2013, 04:24 PM)darkboz Wrote: Can u link to me your profiles R3P0 ? i could take a look, i'am pretty experienced now :)
Dark please enable PM's in your profile, I have something profile related I need to discuss with you in private.
RE: Help with setting up profiles - darkboz - 12-29-2013
(12-28-2013, 10:00 PM)R3P0 Wrote:(12-13-2013, 04:24 PM)darkboz Wrote: Can u link to me your profiles R3P0 ? i could take a look, i'am pretty experienced now :)
Dark please enable PM's in your profile, I have something profile related I need to discuss with you in private.
Sure, there u go
