Posts: 32
Threads: 6
Joined: Oct 2017
(09-21-2019, 01:42 PM)tannerru Wrote: (09-21-2019, 08:45 AM)Gseeker Wrote: (09-20-2019, 04:29 PM)tannerru Wrote: Just figured I would put this out there,
Base Stats
Craft - 2254
Control- 2251
CP - 541
Food - HQ Cunning Craftsman's Syrup and HQ Blood Bouillabaisse
Was trying to Craft Grade 2 Tincture of Strength and was unable to complete the craft.
The 70D works flawlessly. The 35D very rarely might fail BUT if you tweek the profile just a bit it works perfect also, and it even uses Reuse if you have the CP. Don't know why it failed for you! :(
Base stats
craft - 2245
control - 2213
cp - 541
Yea It really did not make sense to me, It will 100% it Quality wise. But fail on progress.
Did it fail just once or is it a constant failure?
i can try and lower my stats to test but i have not had a single progress failure on either profiles
Posts: 32
Threads: 6
Joined: Oct 2017
I finally saw 2 failures on 70D making Robe Lettuce Salad. checked the log and manipulation was skipped both times, then it went back to normal, i'm not really sure how to fix that unfortunately
Posts: 21
Threads: 4
Joined: May 2017
(09-22-2019, 03:36 AM)petoria Wrote: (09-21-2019, 01:42 PM)tannerru Wrote: (09-21-2019, 08:45 AM)Gseeker Wrote: (09-20-2019, 04:29 PM)tannerru Wrote: Just figured I would put this out there,
Base Stats
Craft - 2254
Control- 2251
CP - 541
Food - HQ Cunning Craftsman's Syrup and HQ Blood Bouillabaisse
Was trying to Craft Grade 2 Tincture of Strength and was unable to complete the craft.
The 70D works flawlessly. The 35D very rarely might fail BUT if you tweek the profile just a bit it works perfect also, and it even uses Reuse if you have the CP. Don't know why it failed for you! :(
Base stats
craft - 2245
control - 2213
cp - 541
Yea It really did not make sense to me, It will 100% it Quality wise. But fail on progress.
Did it fail just once or is it a constant failure?
i can try and lower my stats to test but i have not had a single progress failure on either profiles
It was a consistent failure after HQ mats were gone. I'm fully melded with comfy melds.
With foods I am at
Craftsmanship - 2254
Control- 2315
CP-623
Unless this legit needs BIS melds.
Posts: 32
Threads: 6
Joined: Oct 2017
09-25-2019, 06:00 AM
(This post was last modified: 09-25-2019, 06:48 AM by petoria.)
(09-23-2019, 03:30 PM)Tannerru Wrote: (09-22-2019, 03:36 AM)petoria Wrote: (09-21-2019, 01:42 PM)tannerru Wrote: (09-21-2019, 08:45 AM)Gseeker Wrote: (09-20-2019, 04:29 PM)tannerru Wrote: Just figured I would put this out there,
Base Stats
Craft - 2254
Control- 2251
CP - 541
Food - HQ Cunning Craftsman's Syrup and HQ Blood Bouillabaisse
Was trying to Craft Grade 2 Tincture of Strength and was unable to complete the craft.
The 70D works flawlessly. The 35D very rarely might fail BUT if you tweek the profile just a bit it works perfect also, and it even uses Reuse if you have the CP. Don't know why it failed for you! :(
Base stats
craft - 2245
control - 2213
cp - 541
Yea It really did not make sense to me, It will 100% it Quality wise. But fail on progress.
Did it fail just once or is it a constant failure?
i can try and lower my stats to test but i have not had a single progress failure on either profiles
It was a consistent failure after HQ mats were gone. I'm fully melded with comfy melds.
With foods I am at
Craftsmanship - 2254Control- 2315
CP-623
Unless this legit needs BIS melds.
does not need BIS melds, when i made it i did not have them and was still completing just fine. i think sometimes minion wonks out and skips some steps, i thought about adding checks to certain steps to keep from failing but i think that would just make the synth hang without any real feedback as to what is wrong.
below is the profile with your stats, my best guess is ingenuity or manipulation is not going off.
also someone else posted a newer profile that may work better and i posted a profile that Zanci made that may also perform better
![[Image: JvxVI0N.jpg]](https://i.imgur.com/JvxVI0N.jpg)
Posts: 8
Threads: 0
Joined: Jul 2015
still uses great strides even though quality is at 100% before step 19-20.
Posts: 8
Threads: 0
Joined: Jul 2015
10-17-2019, 10:28 AM
(This post was last modified: 10-17-2019, 10:29 AM by djevol.)
consistently failing on prismatic ingot, 2* 35D crafting. the bot just increases quality until it breaks..
i'm at minimum for everything except CP, 2248 craftmanship, 2228 control, 509 cp unbuffed.
EDIT: weird. restarting the bot worked. Guess it wonked out somehow. RIP my prismatic ingot mats.
Posts: 43
Threads: 3
Joined: Oct 2015
Mine is messing up too namely i think with great strides getting used too early.
Posts: 35
Threads: 2
Joined: Oct 2014
^^ this will need an update with the changes of 5.1 update, it's no longer a valid file.
appreciate the efforts it use to work like magic for me.
