[andysx]

I want this so bad but don't know how to put it together. Anyone can put this together for me I would be so happy.
This is what I want it to do (it's a pos hack):
Pressing A: -X by set value
Pressing D: +X by set value
---
Pressing W: +Y by set value
Pressing S: -Y by set value
--
Pressing UP: +Z by set value
Pressing Down: -Z by set value
--
And a "tick" setting to increased or reduced the rate of change (movement speed).
I guess taking "Player.pos" info then using "GameHacks:TeleportToXYZ(X,Y,Z)" to add/subtract value.
Or even better if somehow can lock the players Z -plane with sort of a no-clip and speed hack for free movement in any direction. +

[Cichard]

in 3d gaming teh Y is the vertical plane.

[Ace]

Basically a small module with an OnUpdate() handler, that checks to see if certain keys are held down.

Code:

FlyHack = {}
lasttick = 0

function FlyHack.OnUpdateHandler( Event, ticks )
    if ( (ticks - lasttick) > 200 ) then
        lasttick = ticks
        
        --keys can be found here (convert from hex to decimal) - http://nehe.gamedev.net/article/msdn_virtualkey_codes/15009/
        if ( MeshManager:IsKeyPressed(038) ) then -- if holding down up key
            local ppos = Player.pos
            GameHacks:TeleportToXYZ(ppos.x, ppos.y + 5, ppos.z) -- fly up some predetermined value
        elseif (MeshManager:IsKeyPressed(040) ) then
            local ppos = Player.pos
            GameHacks:TeleportToXYZ(ppos.x, ppos.y - 5, ppos.z) -- fly down some predetermined value
        end
        
    end
end

function FlyHack.ModuleInit()
end

RegisterEventHandler("Gameloop.Update",FlyHack.OnUpdateHandler) -- the normal pulse from the gameloop
RegisterEventHandler("Module.Initalize",FlyHack.ModuleInit)

Something along those lines, not tested at all.

[Kate]

Hi, I tested this out and works to a degree ;)

Problem is, when you go "up" if you press forward you fall to the floor, its not keeping you at the same Y pos

what you really want is to have it so that whatever your current Y value is by setting it with you up/down keys, that when you move with "wasd" it keeps you at that height.

I think the problem, may be with the method. i.e rather than telling the software what your (fixed) y pos. and setting it, were trying to teleport to a new pos.y and thus when you try to move in any direction you fall to the ground.

Is there a way to trick ffxiv into thinking that whatever value we put in player.pos.y that, that is in fact the players normal pos.y?? (i.e so it doesn't fall when moving)

[Ace]

The short answer is no, but you can work around that. You won't be able to do a standard "move" with a fly hack. Any movement has to also be a teleport action. The code snippet was only to show how it would be coded up, with the intention that the OP or whoever could finish the movement actions for the x and z axes, since this is the "help lua coding" forum, not the "request module" forum.

[Kate]

The short answer is no, but you can work around that. You won't be able to do a standard "move" with a fly hack. Any movement has to also be a teleport action. The code snippet was only to show how it would be coded up, with the intention that the OP or whoever could finish the movement actions for the x and z axes, since this is the "help lua coding" forum, not the "request module" forum.

Ok good to know thanks, and of course thank you for the code snipet ^^

Fancy a go at a request for flyhack? ;)

[ymko]

The short answer is no, but you can work around that. You won't be able to do a standard "move" with a fly hack. Any movement has to also be a teleport action. The code snippet was only to show how it would be coded up, with the intention that the OP or whoever could finish the movement actions for the x and z axes, since this is the "help lua coding" forum, not the "request module" forum.

Ok good to know thanks, and of course thank you for the code snipet ^^

Fancy a go at a request for flyhack? ;)

Here is an idea,

store your position,
change it with keys,
teleport to it every frame